If your Mazda 323 is a 1994 then it could well be your thermostat. I had an over heating problem when my 323's temp gauge was flying off the rails. I tried lots of things even took it to 7 mechanics and they all said my headgasket had blown. I found the thermostat after it being so old it starts to jam up. I replaced it and walah. Main symptoms are your radiator water beginning to boil and shake you can hear it too.
If you find the pipe connected to your engine on the right hand side of your radiator take a set of pliers and undo the jubilee clip on the engine side of the pipe. Take of the inlet which is holding the pipe to the engine by 3 bolts. The thermostat is located behind it. Replace the thermostat which you can pick up for around £6 then replace everything, refill your radiator and bobs your uncle. good luck
To troubleshoot a Mazda 323 that is starting, turning over, and getting fuel, check the spark plugs first. You should also ensure the air filter is clean.
how do remove the brake drum on a 1991 mazda 323
No sorry they are completely different.
Mazda 323 familia valve timing set up
114x4 thats what i was told on my mazda 323 '84
The speaker size for a 1992 Mazda 323 would be 6-1/2.
The Mazda 323 of that time from had a 1600cc engine but that isn't going to effect the issue of where to get a wiring diagram. Haynes makes a manual for the 1990-1994 Mazda 323. If you have a 1986-1989 Mazda 323, you will need to get a FSM (Factory Service Manual).
i need carburetors Mazda 323 1.5L rebuilding Harold E. Lozano P. harenlo@cable.net.co
The recommended brand coolant for use in a Mazda 323 Astina is Genuine Mazda Long Life Coolant. This can be bought at any Mazda dealership.
It should work as the Tracer is just a rebadged Mazda 323. A close look at them should let you know, especially if the wiring is the same.
SAE 10W30
4stud vs 4 stud, yes it will, 4 stud vs 5 studd, it will not. for all the 4 stud Mazda 323(f) from by 88 up to 2001 will fit