possibly a blown head gasket
The coolant drain plug on the 1993 Honda Civic is located right below the manifold bolts close to the transmission side. There is another drain plug located on the back of the block left of the fuel filter.
The engine coolant on a 1991 Honda Civic is replaced by turning the drain petcock and releasing the coolant. The filler cap is then removed and coolant added until the system is full again.
94 civic transmission fluid drain
it is next to where to mount the oil filter. it is either 17mm or 19mm with 58 lb torque
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
Before replacing the radiator hose on a 1996 Honda Civic drain the coolant system. Once drained remove any clamps holding the hose in place and pull the unit off. Replace with new hoses.
You will have to syphen.
yes it does but under refrigirator
Assuming there is coolant in the engine the most likely cause is a build up of sediment behind the coolant drain or in the coolant drain tap itself.
It can be very simple to remove the radiator from a Honda Civic. The first step is to drain the coolant from the radiator. The next step is to disconnect the cooling fan switch and remove the hoses. Then the cooling fan should be removed. Then the radiator should be unbolted and lifted carefully from the vehicle.
It's located below the exhaust manifold.
Google Honda pilot block heater. There is a parts dealer that includes installation instructions showing where the plug is to drain the coolant. This is where the block heater screws in, replacing the bolt.