Why is the drivers side wiper blade not working on my Peugeot 206?

Answer 1

The drive arm from the motor to the drivers side wiper as snapped, you can't just buy the arm it is a complete unitm apparantly it is a common part sold by Peugeot £220.00 parts and labour from dealership, or do what I did £20.00 for the unit from scrapyard and 1 hour of my time to remove and install 6 nuts and 1 bolt to remove plus power plug to motor. Undo the 3 nuts that hold the wipers on to the drive splines, with a pry bar or claw hammer lift of the 2 wiper arms. Remove the plastic cover to expose 3 32 mm nuts, remove these nuts and water seal washers, look under the wiper motor at the back bulk head and you will see a 10mm hex head bolt remvove this bolt. There is a wire spring holding the plug to the electric motor , lift the spring up from the bottom and pull the plug off. You can now drop and remove comlete mechanism make sure fixing bracket at the bulk head does not catch on wiring loom when you pull the unit out. Install method reverse of removal time approx 1 hour tools required socket set pry bar or claw hammer. Hope this helps.