cz forword baise
zener breakdown and avalanche breakdown.
This space is for answering "http://wiki.answers.com/Q/Why_does_voltage_remain_constant_in_the_reverse_breakdown_region_in_a_zener_diode" Why does voltage remain constant in the reverse breakdown region in a zener diode?
zener diode is a special type of pn junction diode that work in breakdown region . There are two types of brekdowns in zener i.e avlanche breakdown and zener breakdown depending on the doping concentration. A zener diode in an on state can be considered as a voltage source ,equal to its zener voltage n hence act as an voltage regulator
how can u tell if the rectifier is bad on a 2001 suzuki intruder 1500lc
A one diode rectifier is called a half wave rectifier and only allows current flow for the positive portion of the sine wave. A two diode rectifier, or full wave rectifier allows positive current flow during the positive portion of the wave as well as positive current flow during the negative portion of the sine wave. This results in a much cleaner DC power signal. The addition of a capacitor in the output circuit will clean up the signal very nicely.
The breakdown voltage of a diode is the minimum voltage at which it conducts in both directions. If you have a 100-volt rectifier diode (1N4002) and you wire it into a 110v circuit, it will flow current in both directions and you'll get no rectification.
The difference is , the break down in a zener is desirable, well designed, expected, healthy and designed for a particular value. After breakdown, it can and is expected to maintain that condition for a long time. zener is optimized to work in this region.They are designed to have very low breakdown voltages. In contrast, the break down in a rectifier diode is undesirable, not well designed, not respected. This diode is optimized to work in the rectifier region and optimized for that. Breakdown region is avoided in normal operation. The breakdown voltage is normally very high, above 100 volts.
zener breakdown and avalanche breakdown.
Yes **************************************** Yes they can but there are pitfalls. A normal diode will have a high reverse breakdown voltage. A zener has a relatively low breakdown voltage (its "zener"voltage). If a zener diode is used as a rectifier it must have a zener voltage at least twice the peak of the applied a.c.
yes, diode can be used as rectifier diode to convert ac to dc
False, a zener diode is normally operated reverse biased in breakdown.
This space is for answering "http://wiki.answers.com/Q/Why_does_voltage_remain_constant_in_the_reverse_breakdown_region_in_a_zener_diode" Why does voltage remain constant in the reverse breakdown region in a zener diode?
The zener diode protects the meter by stabilizing the voltage when it goes in to the breakdown region.
yes ofcourse diode can be used as rectifier but it's an uncontrolled rectification.
tunnel diodethe doping level of the tunnel diode is high when compared with the rectifier diodeit exhibits negative resistancerectifier diodethe doping level of rectifier diode is low when compared with the tunnel diode
By F*****g your mom
A diode is used primarily as a Rectifier