Dip tube failure approachng fast
the flapper in tank is not sealing after flush.change flapper.
The speed of water flowing through the tank in a given distance.
If you mean the water flowing from a filter, yes. It needs to fall into the tank water to work properly.
what is the height of the water in the tank, that has to be added the the height of the stand. if the water is static (not flowing) it will develop 9.8 kPa per metre of head (height) between the outlet and the very top of the water in the tank. if flowing then the losses in the pipe would have to be taken into account
Shamu's tank at Sea World Orlando is 36 feet deep. The water is kept at a constant 55 degrees.
Install a new fill valve inside the tank. It is easy.
Sound like maybe the bladder has burst in the tank and is covering the drain.
You will get some back pressure from the water heater. It will come out of either the hot or cold. Shut the tank off if there is a shut off there.
A charcoal starter cannot readily be used to heat hot water tank as it produces far too little heat. A hot water tank requires several thousand BTU's of constant heat to bring the water up to temperature.
It is time to replace hot water tank before it starts leaking. Try and drain tank and see if that helps. It is rust that is poping inside tank. If your tank is over 8 years old i would just replace it
The thermostat could be bad not opening when the temperature reaches the opeing stage and the water is boiling back over to the tank and over flowing....
no the diesel seems to be flowing back into the tank