Have you checked that the PCV is working. ( positive crankcase ventilation ) This valve when working sounds like a rattle snake when you take it off and shake it. If you remove it while the engine is running and block it, the engine will slow down due to restricted vacum, then when you put it back in it will pull air from the engine.
I would like to change the blower motor in my 1994 Ford Tempo by myself. Do you have any instructions for me to follow?
with a motor dolley
The filler tube houses the dipstick and is located on the passenger side of the motor, towards the firewall (back of the motor),
Because it's been overfilled, or you're using the improper weight motor oil
Leave the motor there . Why do the extra work .
On the right side of the motor, mounted to the drivers side of the motor between the motor and a hose. Its smaller than you would expect.
4cyl. 2.3 L unless it has a v6
Through the filler cap on the valve cover.
CHECK THE FUEL PRESSURE, MAY NEED ELECTRIC FUEL PUMP REPLACED.
um i beleave it is behind the motor underneth the intake manifold above the starter motor... one senson with a green wire coming out of it... and your welcome!!
L4, there are 3 mounts, engine and transmission.
through the oil filler cap on top of the motor