You didn't specify what year the car was,but normally white smoke indicates running rich,especially in a carburated engine.If the smoke appears after the car has set up for awhile,and doesn't last long once it's started,it could be valve stem seals worn, allowing oil to seep into the cylinders.If that is the case,it will only get worse.It will eventually cause a carbon build up on top of the pistons and foul the plugs.The oil light coming on may be due to losing oil through the bad seals.That is probably true if you have to add oil every 800 miles,and there are no obvious leaks.
while driving yur car reduces speed then pulls off with speed and backfires what can cause that
Common problem with this engine is the ignition coils.
The term for having an excessive Blood Alcohol Concentration (BAC) is DUI or DWI. DUI : Driving Under the Influence DWI : Driving While Intoxicated or Driving While Impaired (drugs or alcohol)
leaking or cracked manifold
i bet it wouldn't be hard to put the headlights on the radeo power that comes on when the ignition is on...
Immediately after you finished your last drink and turned on the ignition in your car and began driving.
There are several things that can cause your Ford E2 50 Van to hesitate while driving. The most common cause is a malfunctioning ignition switch.
IT usally means that WATER is coming out of YOUR tailpipe wich is STEAM & running ruff is Because the smoke is coming from the DEAD cylinder because the head Gasket is blown(bad) {USALLY}
A mechanism that locks the steering wheel if the ignition switch is not in the "run" position, preventing someone that is trying to steal the car by hot wiring the ignition from driving the car.
By driving with the key fob in the ignition.
yes
Ignition switch