Chevy Blazer

Why is your ABS light on your Chevy Blazer?

345

Top Answer
User Avatar
Wiki User
Answered
2010-02-11 21:40:45
2010-02-11 21:40:45

The antilock brake system has a problem. The light will remain until it is fixed. The abs will not function when light is on. Take it to your mechanic soon.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


Pull the fuse, but the abs light will remain on.


The ABS module has detected a problem with the ABS system. Until the problem is fixed the light will remain on. As long as the light is on the ABS function will not operate if needed. Have a trusted mechanic diagnose the problem soon.


The ABS light on a 95 S10 Blazer has to be reset by a mechanic or the dealer. Unplugging the battery on the vehicle will not reset the ABS light.



The abs light is on because there is a problem with the abs system. The light will not go off until the problem is fixed.


The ABS light is on because there is a problem with the ABS system. Once the problem is fixed the light will reset itself after a short drive. Your local auto parts store can retrieve the code(s) set in the ABS module to help direct you to the fault.


How do you reset check engine light for the 2009 Chevy trail blazer?


problem with the abs, get it fixed


dont think it has one, or dose it,


how do you replace dome light in s10 chey blazer?


if the abs light is on then its means you have an issue with your anti lock brake system


brake and abs light on , on 1994 Chevy Cavalier Z24


The majority of the time, this is due to a problem with the wheel sensor. On 4-wheel ABS there are 4 sensors, 2 on 2-wheel ABS. I would suggest making sure these were not disconnected or damaged.


ABS means Anti-lock Brake System. If the light is staying on, you probably need to have your brakes checked.


The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.


The abs light is on because you have a problem with the abs system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself.


If your Chevy Venture ABS light is on, that means that there is some type of problem with your anti-lock brakes. For the light to turn off, you will need to see a mechanic and have the problem looked at.


There is no ABS relay on a Chevy 2002 Astro Van. If the ABS light is on it is indicating a problem with the vehicle that should be checked out.


Take it to a professional for repair. Your anti-lock brake system has a problem. This has nothing to do with your normal braking system which will still function. If you do not care that the ABS is not working, ignore it.


Repair the ABS system so it functions.


There is a problem with the ABS. Take it to a professional.


The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.


Yes, the doors from a 98 Chevy Blazer will fit a 2001 Chevy Blazer with a little moderation.


ABS stands for Anti-Lock Brake System. If the ABS light is on, your ABS has a problem. Clean all wheel sensors of any debris. If that does not help, Seek out a professional for this repair.


it is a 1995 Chevy blazer and it will not go into park. have to use the emergency brake when stopped, and neutral to start it



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.