in 8086 there is 20 bit address bus,so it can address 1,048,576 address.
At each address we can store 8 bit address (1-byte)but if want to write a word(16-bit)into a memory segment to store data in byte form then we write the data in two consecutive memory address which are even(low) and odd(high) memory.
Its MRDC (memory read control) it is a maximum mode pin in 8086 microprocessor
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
Memory to memory access is certainly possible in the 8086/8088 microprocessor. Look at the repeated string copy instructions.
8
The 8086 microprocessor has 40 pins.
The 8086/8088 is a 16 bit computer running on a 20 bit address bus. Processes use a segmented memory architecture to access one of four 64kb memory segments from a physical space of 1mb.
The Instruction Pointer (IP) in an 8086 microprocessor contains the address of the next instruction to be executed. The processor uses IP to request memory data from the Bus Interface Unit, and then increments it by the size of the instruction.
The 8086/8088 microprocessor has a 20 bit address bus, so the number of memory locations it can address is 220 or 1,048,576.
Because the 8086 is a 16 bit processor. Memory is organized as 512 MW of memory, or 1024 MB of memory.
queue of 8086 microprocessor is 6 bits
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
the advantages of 8086 microprocessor over 8085A microprocessor is that 1)it is a 16 bit microprocessor 2)the disadvantages in 8085A microprocessor like low speed,limited number of registers,low memory addressing capability,less powerful instruction set have been overcome in 8086 registers