because current is same in series resister
only shunt dc motors have varaible speed control. compound dc motors do however NT as much, plus they are just a mixture of series and shunt dc motors.
shunt field winding have more resistance than series field winding ************sai ganesh ************269*******
If you are placing more than one resistors in series, then its combined resistance is higher than when you place these resistors in shunt.
the basic difference is ,in short shunt motor the series field winding wont carry any current under no load condition whereas in long shunt motors series winding will carry no load current.....
Types of AC MotorsClassification Based On Principle Of Operation:(a) Synchronous Motors.1. Plain2. Super(b) Asynchronous Motors.1. Induction Motors:(a) Squirrel Cage(b) Slip-Ring (external resistance).2. Commutator Motors:(a) Series(b) Compensated(c) Shunt(d) Repulsion(e) Repulsion-start induction(f) Repulsion induction
Basic voltage regulators are classified as either SERIES or SHUNT, depending on the location or position of the regulating element(s) in relation to the circuit load resistance.
In a series type ohmmeter, the current passes through the resistance being measured, while in a shunt type ohmmeter, the current is diverted around the resistance being measured. Series type ohmmeters are usually less accurate but simpler, while shunt type ohmmeters are more accurate but more complex.
yes
Actually ammeter is a galvanometer which is shunted by a resistance called shunt. For large currents major part of it is bypassed through the shunt. The parallel combination of shunt resistance and meter resistance is added to the circuit resistances , so the value indicated by the ammeter is slightly lesser than the actually value.
A current shunt is a device with a very low resistance, usually around one ohm. The exact resistance of the shunt is printed on the device for reference, and it is often slightly higher or lower than nominal, for example a 1 ohm shunt may actually have a resistance of .99986 ohms or 1.0002 ohms. A current shunt is not used to control current, however, so I do not know if this is the device you are asking about. It is used to measure current by using a precision voltmeter to measure the voltage drop across the shunt, and then using ohms law to calculate the current. Voltage (Volts) divided by Resistance (Ohms) equals Current (Amps). When the shunt is placed so that it interrupts a circuit, (placed in series), the current flowing in the circuit can be accurately measured with the shunt, without changing the values in the circuit enough to affect it. Many shunts of this type have a large heavy duty resistor that does not overheat easily. The shunt should also have a max current rating listed on it.
it maintains a constant speed under varing load
Shunt means parallel only..................