sounds like a bad door latch mechanism.
its called the pu$$y
Fod product? Spray the door latch assembly liberally with WD-40, operate the door a few times then spray with a silicone spray
Connect the power and unlock the shut drivers door with your key.
make sure your door shims are not worn out,....open the door half way and lift the door up, if you feel slight movement or looseness in the door you may have to replace the shims
a door in your car is not fully shut.
how do you fix a prosthetic leg that the release screw wont go all the way down in to the socket
Get a new car you loser.
If the door is shut then it's probably the switch in that door or wiring to it.
Because there is a problem with it.
Try checking the latching assembly on the door. If it snaps shut before the door colses, it keeps the door from closing. With the door open, look at the assembly while pulling the door handle to open. Use a screw driver and snap the latch that holds the door shut down. It should pop back and reset. Worn out door hinge pins and bushings lead to poor alignment and damage to latch and striker pin.
A door switch may be broken or out of adjustment or the dome light switch on the dash is turned on.
the door striker needs adjusted along with possibly the latch mechanism.