why wont my 96 Chevy Blazer start it acts like it wants to start i got a new start I've changed the time its like there is still a mist it tries to start but wont i got new plugs wires what could the problem be
If it turns over but does not start,it could very well be a bad fuel pump and/or clogged fuel filter. The fuel filter is under the driver's side door right behind the frame rail under the seat. You WILL get gas on you if you are not really careful when you change it. Being as quiet as possible, turn the key to the start position and listen for a humming sound for a second or two f4rom the back of the vehicle, that means the fuel pump is running. IF you do not hear it, check the fuse block for a fuel pump fuse or circuit breaker.
One more think you can check is for a bad ignition fuse. Under the hood is a large fuse panel and there is a fuse that will say "ignition". check that also.
There's a few options for ya. Good Luck.
Are the door interchangeable on an 1987 chevy truck and an chevy blazer 1988
we are trying to find regular factory wheels that fit the lug pattern off of a 1997 Chevy blazer s-10 2 wheel drive
Yes it will, but you have to put all the blazer engine stuff onto the beretta engine...
There is no choke to adjust.
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.
autozone.com
The 1988 Chevrolet Blazer front speakers measure three inches by four inches. The rear speakers measure four inches by five inches.
A blown fuse could be the reason the window will not go down on your 1988 Chevy Blazer. Another possibility is that the switch is worn out or has a loose, broken, or corroded wire.
no
It doesn't have a MAF sensor.
module locatedwhere is the module on a 9 Chevy blazer
This happened with my 2002 Blazer. The windshield wiper switch also had an effect on the radio. The dealership found two weak electrical grounds and that solved the problem.