On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on the drivers side engine valve cover , on the top of the valve cover , near the REAR of the cover
On the top of the valve cover on the drivers side of the engine , near the rear of the valve cover
On a 1996 Ford Ranger , 4.0 : The PCV valve is on top of the drivers side engine valve cover , near the rear of the valve cover
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on top of the drivers side engine valve cover It is near the rear of the valve cover ( towards the firewall end )
On a 1997 Ford Ranger , 4.0 EFI engine : The PCV valve is on the top of the drivers side engine valve cover , near the rear
Check to be sure it isn't the water pump.
on the engine valve cover , drivers side , towards rear of cover , near firewall
check this out, it's same engine as in Rabbit http://rabbitownersclub.com/vw/showthread.php/engine-plastic-cover-4981.html
In the top of the valve cover , on the drivers side of the engine , near the rear of the valve cover , next to the firewall
The engine timing chain cover
On the valve cover ( on the 2.9 L and 4.0 L V6 engines it is on the passenger side valve cover of the engine )
how do you change tail light cover on a 1994 ford ranger
I believe it is on the engine valve cover - drivers side
I believe it is on the valve cover , drivers side of engine , towards the rear
On a 2001 Ford Ranger : Open the drivers door , and IN the drivers end of the dash you will see a removable plastic fuse panel cover . The fuse panel is behind the cover Also , the Power Distribution Box ( which is " live " ) is located in the engine compartment , on the drivers side of the engine compartment
check were the headers are or they will be under the spark plug cover on the engine cover one of these spots
the oil pressure switch is located in the rear of the engine compartment on the drivers side under the valve cover
Small pinhead size holes behind the water pump,eventually breakthrough the cover and voila you get coolant mixing with engine oil.
There is a removable oil filler cap on the valve cover and if you happen to have the 2.8 L V6 engine the oil filler cap is on the driver's side valve cover towards the firewall end of the valve cover
To the left of the hood latch is a cover for the plug in port where a diagnosis scanner can plug in. Pop out the cover and take it to autozone for a free diagnosis.
Open the drivers door and you will see a plastic fuse panel cover in the drivers end of the dash , the fuses are behind the cover If you want to see the fuse diagram check out ( www . motorcraft service . com ) no spaces . Click on Owner Guides
Open the hood it is a yellow stick below the engine cover
Generally on top on the valve cover or engine cover.
Begin by removing the cover to your 1993 Ford Ranger valve cover. Remove the gasket and clean the surface. Put the new gasket on and return the elf cover to its original position.
its mounted on the oil pump assembly behind the inner timing belt cover. that's on a 2.3L engine