You may need to shim the starter. When you turn the key the gear from the starter is slamming into the teeth on the flywheel. Did you get any shims with the new starter? If not you may need to buy some. You just want to shim it out just enough where the teeth from the starter and imbedded into the teeth on the flywheel. Not too much and not too little otherwise you will chip or break a tooth off. You are trying for a good mesh of teeth to teeth.
What year,what motor?? it is a 2002 Chevy avalanche 1500
The starter solenoid is mounted directly on the starter.
The starter solenoid is attached to the starter.
You will have to remove starter, It is behind the starter in the block.
Starter is located on passenger side of engine. On the side of the engine at the bottom.
It is behind the starter, You will have to remove starter to service it,
Follow the positive battery cable from the battery, it will lead you right to the starter.
It's on the lower right side of the block
It depends on what year and engine you have but, if you follow the positive battery cable from the battery, it will lead you right to the starter.
Remove the positive battery cable from your 1988 Chevrolet 1500 pickup truck battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
passenger side by the oil pan in front of the transmission
It is mounted on the top of the starter. Just follow the positive cable from the battery and it will be bolted to the selonoid.