0
Why would the brake lights on a 1985 LeBaron not work even though the tail lights work fine?
Wiki User
∙ 16y ago
This happened to my 1985 Lebaron Conv and all the car needs is a new brake light switch mounted on the brake pedal under the dash. Problem solved!
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What would make the two regular brake lights go out even though the rear window brake light is working?
Taking your foot off the brake pedal...?
Why would brake lights work intermittently?
brake switch ???
What would cause brake lights and running lights not to work you have power to the brake switch?
fuse, bulbs
No brake lights on your Ford Escort?
Most likely no brake lights would be due to a faulty switch on the brake pedal or a bad fuse.
Why would your dash lights stay on and your parking lights and brake lights 79 Corvette?
== ==
Why would you have no brake lights but all the other lights work?
Blown fuse or bad brake light switch?
Why would both of your brake lights stay on even though you are not hitting the brake petal?
Brake light switch stuck or out of adjustment. It is either located on the brake pedal somewhere or it may be a pressure switch located on or near the master cylinder.
What would cause no brake lights in rear when the running lights are on the vechile is Nissan sentra?
brake light switch would be most common cause
Why would the tail lights work on a 1990 jeep Cherokee but the brake lights don't work?
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal
What causes the brake lights to fail when all other lights are working fine?
The BOO (Brake On/Off) Switch may need to be replaced. If it is bad, it would cause the brake lights to NOT illuminate when the brake pedal is applied.
What would cause the brake lights not to work on an 84 corvette when all of the running lights work?
BAD BRAKE LIGHT SWITCH AT TOP OF BRAKE PEDAL
What would cause the brake lights in a 95 civic to never come on even though the tail lights work and the fuses are good?
There may be a cut in the wire(s). You will need a Digital Volt Meter to test the wire(s) at your brake light. There is a switch that is actuated when you apply pressure to the brake pedal. If the switch is malfunctioning your lights won't come on.
