because lekage current of silicon is less than germenium
silicon is less sensitive towards temperature.It costs low compared to germanium,
cut in voltage *** for silicon is 0.7volts and that for germanium is 0.3volts.According to Millman and Taub, "Pulse, Digital and Switching Waveforms", McGraw-Hill 1965, the cutin (or offset, break-point or threshold) voltage for a silicon diode is 0.6, and 0.2 for germanium.Breakdown voltage is another thing entirely. It is the reverse voltage at which the junction will break down.
A: Because the element has different property as gallium arsenide.
Germanium has four number of shells while Silicon has three number of shell. therefore for germanium less energy is required to move the electron from valence band to conduction band if compared to silicon. So at room temperature for germanium their are more number of electrons present in conduction bond hence more number of holes present in the valence energy band. Due to movement of holes reverse saturation current is produced. Their is more number of hole movement in germanium comparatively therefore reverse saturation current is more than silicon for germanium. You may refer to Electronic Devices and Circuits by Allen Mottershead Regards, Zain Ijaz UCTI, Malaysia Mechatronic Engineer.
The class of materials that make up transistors is "semiconductor." A transistor is often made from very pure silicon that is doped with germanium or other dopant to change its electrical properties.
the leakage current of silicon is less when compared with the leakage current of germanium.. hence scr's are made up of silicon than germanium.. hope tis one is useful to u all!- Vignesh.L(engineer, 1st year)
Generally SCR is used at high power applications, in order to withstand the temperature dissipated in the SCR, THERMAL STABILITY is very high enough. It means that thermal stability of silicon is very high compared to germanium that's why germanium is not preferred. But that does not mean it is not possible, in fact before silicon became common in the 1960s devices equivalent to the SCR were built using germanium!
For the same reason it is used in transistors and ICs: its a very good semiconductor. Note: equivalent devices have been made with germanium in the past, when most transistors were germanium. But they called them thyristors not GCRs.
In the early 1960s it was, I've seen the devices.
Germanium is not used in integrated circuits. Silicon is.
scr is a silicon control rectifier used to control the rectifing voltage.. its a bidirectional device can use it for both the directions......
The metalloids are Boron, Silicon, Germanium, Arsenic, Antimony, Tellurium, and Polonium.
Silicon and Germanium are the elements used in transistors
And SCR will conduct appreciable current when it is gated "on" and thus "told" to conduct. A silicon controlled rectifier(SCR) is an electronically controlled DC switch, and the gate is the terminal to which the control voltage is applied. Use the link below to learn more.
germanium
Yes,silicon and germanium are semiconductors.
products made by silicon are more stable than those made by germanium