yes they will. in addition to the larger 10 inch drums (should have cooling fins on the exterior of the drums) you will need a set of 10 inch brake shoes.
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
Instead of using hydraulic brake fluid to apply the pads to the brake drums or discs, air pressure is used.
Remove the wheel and measure the diameter of the drum.
If you are inexperienced, you should not be messing around with the brake drums.
New brake drums are broken in the first time you go for a drive usually.
brake drums should pull off if not rusted on.
Remove the drums and take them to an auto parts store that has a brake drum lathe.
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.
Almost all Auto Parts stores and machine shops resurface rotors and brake drums.
i was wondering how to change rear brake drums for 1999 Chevy venture
Brake drums can not be cut. The shoes inside can be replaced.Only disc brakes(rotors) can cut.