Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few to complete the project.
i have a 1970 dodge dart with a slant 6, 225 and need to know if a 318 out of 1970 dodge dart will mount up with the motor mounts and tranny.
Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few.
The easiest way to approach putting a 318 into a slant 6 1970 dodge dart would be to purchase a conversion mounts. This will give you all that you need to make an easy transition. Note, you do not need to alter the K, simply acquire the mounts and it should fit nicely.
To make a 318 into a slant 6 engine on a 1970 Dodge Dart you will need new engine mounts, fuel lines, and bigger radiator. What needs to be done first is to remove the old 318 and add the new engine mounts first. This is not something that should be done if you don't have the proper tools and equipment.
they could be bent or you need to get the wheels and tires spin balanced.
that all depends on what engine you have in it, a 6 cylinder or a v8, need more information.
either a v8 K-frame from a dart or you can use motor plates to bolt the engine in.
.035
#1157.
sure you can, you just need to get a 4 bbl. intake manifold for the 318-340 engine, edelbrock makes them and summit racing or jegs sells them.
I'm sure you could if you can find the parts you need and have the experience to do it.
any parts store can get you the right parts.