Depends on what the bell housing for the trans is off of.
the 727 should bolt up to the 340. A 727 transmission from a slant 6 will not bolt up to a 340. Find one off of a 273,318, 340 or 360.
Do NOT use transmission fluid in your power steering. It is designed for automatic transmissions, and a few rare manual transmissions only. (1965 Plymouth "Slant Six" manual transmission used automatic transmission fluid). In most Chrysler products made after about 2002, ATF is what they use for power steering fluid.
owners manual says 2,000lbs......... towing light trailers 2,000 or less on reasonably level roads in moderate temp -vehichles with 6 cylinder *slant six* or with a833 transmission may tow trailers UP TO 2,000lbs 318-5,000lbs 360-7,000lbs owners manual says 2,000lbs......... towing light trailers 2,000 or less on reasonably level roads in moderate temp -vehichles with 6 cylinder *slant six* or with a833 transmission may tow trailers UP TO 2,000lbs 318-5,000lbs 360-7,000lbs
thickness of a paper match.
check for worn out bushings also when was the last time the oil level was checked
According to my Chilton's Auto Repair Manual : The 225 slant six cylinder engine in a 1978 Dodge has spark plugs gapped at : ( .035 inch )
Engine numbers on a slant 6 are stamped on the top of the block that protrudes from under the head below #1 spark plug.
No. The bolt patterns are different. You will need a transmission (904 or 727) from a small block chrysler. Also,the flexplate and or torque convertors are balanced according to the specific engine used.
From my '72 manual, it's TDC =/- 2.5°
It depends on which engine you have, Slant 6's and 318 & 360 can have A904 or A727 for the automatics and all the big block 440''s use the 727
Need to be more specific
Yes, "fen" and "feeds" is an example of a slant rhyme. Slant rhymes involve words that have similar-sounding endings but are not a perfect match, adding a subtle rhyme effect while not fully rhyming.