I think they will. Not 100% sure though.
5X120.7
Yes, Usain Bolt bench presses every morning after eating french toast. He also enjoys long walks on the beach after bench pressing. It has been reported that Bolt has benched over 462 pounds after eating a heart breakfast.
4.75 bolt pattern.
Not without a LOT of modifications. Use a rear end from ANY '64-'67 GM A body instead. The rear ends installed in the Buick Skylark, Oldsmobile Cutlass and Pontiac Tempest/Lemans are a little different, but will bolt right in with NO modifications.
Depends... Especially on the year. 1969-1970 will have between 9:1 and 11:1. 1971 and later will be somewhere between 7.5:1 and 8.5:1.
We are doing a 1992 skylark and we turned the bolt to the right. It was very tough to get off because of the lock tight they put on but it came out, now we are having trouble getting the tool in the slots to remove the drum itself.
You can switch the bench for captains chairs. The bolt holes are in the floor under the carpet.
4.75
140-160 ft lbs
2 bolt or 4 bolt main?? is it stock??
6 bolt 5.5 6X5.5 6 bolt 5.5 6X5.5
Disconnect the Skylark's battery. Remove the starter's wiring then unbolt the starter. Slide the starter out. Wiggle the new starter back into the hole, and bolt up. Connect the wiring, then reconnect the battery.