140-160 ft lbs
About 200 foot pounds.
You need a harmonic balancer puller, and a 1/2 in drive inpact wrench.
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
it is behind the harmonic balancer.
Behind the harmonic balancer.
We are doing a 1992 skylark and we turned the bolt to the right. It was very tough to get off because of the lock tight they put on but it came out, now we are having trouble getting the tool in the slots to remove the drum itself.
yes
take off your harmonic balancer the answer is behind
sounds like you broke the crank sensor that is mounted right behind the balancer.
It's just behind the harmonic balancer.
its behind the harmonic balancer attached by two bolts but you must first take off the balancer to get to it
at the front of the engine,next to the harmonic balancer