Yes
To change the high beam indicator you have to take the instrument cluster out of the dash.
Since the 4runner's introduction in mid 1984 as a 1985 model, it has established itself as a favorite vehicle of the offroading community. Although based off Toyota's rugged pickup truck, the 4runner brought creature comforts and a measure of civilization while remaining a competent and dependable performer both on and off road. Absolutely, a properly equipped four wheel drive 4runner can be a fun and versatile offroad perforner
It may be a button to push or a screw to take out of one place on the back of the instrument cluster and screw it into another place on the back of the instrument cluster. Izuzu was real big on doing that back in the day.
it pulls straight out. You can create a tool using a thin, flat piece of metal, folded back a half-inch from the tip. With the folded piece facing downward, slide the tool into the crack between the cluster and the dashboard pad. Wiggle and pull the cluster out.
It is located on the bottom right hand side of your radiator. It will have a little plastic wingnut looking thing and a hose coming off of it.
The 1985 Toyota Corolla has one.
The 22RE powered the 1985 to 1995 Hilux, the 1985 to 1995 standard pickup, and the 1985 to 1995 4Runner.
To remove the instrument cluster on a 97 Malibu, first remove the screw at the bottom right of the radio's molding. Then remove the molding and the screws under the steering wheel. Remove the entire molding surrounding the cluster and the four screws to remove the entire instrument cluster.
== ==
It should, but the 1985 dash cluster was easier to read, Eckler's offers a reasonably priced rebuilding service, if you have the original.
There are hundreds of different codes that can cause the check engine light to come on. It needs to have a code reader hooked up to find out the specific code. Most auto parts stores will do this for free.
you're out of Gas. you should try and check fues number:18,7,3,8, ood luck!