If the oil light comes on but the oil level is ok, the problem may be a faulty sending unit, as it turned out in my case.
how i reset check enging light manually at mitsubishi fuso 4m50
If you are looking to replace a tag light on your Mitsubishi you will need to remove the old one first. Check you owners manual for instructions on how to do this.
Check the fuse, check the bulbs, then check the brake light switch.
Check your battery for loose connections and check your alternator.
Have vehicle scanned to determine the problem
Check engine light refers to the emission system - have vehicle scanned to determine problem
If there is no brake lights on a 1998 Mazda pickup, check the fuse. If the fuse has blown, the lights will not work.
Check your engine. Check your fluid levels and add if needed.
The symbols on the dash board on a Mitsubishi Pajero are all of the warning lights. Some of the lights will include a seat belt light, check engine light and battery light.
A Mitsubishi L200 yellow warning light on the dash could mean the ABS is having issues. It is best to check the owner manual for defined warning light meanings.
If not installed properly check engine light will illuminate
Check your head light bulb or check the fuse 10A under the hood and see if it's not blown.
Probably low on coolant, check the reservoir.
You can reset the check engine light on your Mitsubishi Triton TDI by removing the fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
Might Be Yr running out of oil, or water levels are low.
you have to go to a autoparts that check and see what codes come up
is your "NO CHARGE" warning light coming on? if not this could simply be the problem, on some vehicles the charging circuit incorperates the "NO CHARGE" bulb and if its blown the vehicle wont charge. COuld be an alternator problem ( worn bushes etc) or faulty earth lead from alternator.
The computer doesn't allow to start the engine. Check the error code.
Check bulbs - they are double filamented with smaller being for brake lights Check stop light fuse Check the operation of the brake light switch Check sockets for corrosion and ground
Check your gas cap. Make sure the seal is still good. This will cause the check engine light to stay on and is an easy fix.
There are dozens of things that turn the light on. Get the codes read at the auto zone.
I HAVE A 2004 MITSUBISHI ENDEAVOR, AND THE ONLY TIME MY CHECK ENGINE LIGHT CAME ON IS WHEN I FAILED TO CLOSE MY GAS CAP TIGHTLY. THE LONGEST THE LIGHT STAYED ON WAS FOR 3 DAYS AND THEN IT WENT OFF.
i have a 1994 eclipse with a 1.8 we replaced the head gasket and timeing belt now it sputters at low rpms an the check engine light is on what could be th problem ?