the 3.8l mustang engine should fit in it because it has the same everything basically.you will have alot of room in between the front of the engine and the radiator.thats cuz the 4.6l would fill that in. but i believe that it would fit. just do some measurments. then u'll be 100% sure.
A haynes manual...
haynes repair manuals are good but you can go to autozone.com and they have online repair manuels as well it a good site for a lot of information on repair work.
Five quarts including filter. My owners manual says 5.75, including filter. My experience agrees with the extra .75 quarts! :)
on the crank behind the front cover
it's located on the firewall right in back of the intake
Not very easily if at all, and why would you want to?
They always blow the head gaskets between 70 and 100 thousand miles.
3.8 litres is fractionally more than 1 US gallon.
You can safely put 2ml into the 10l aquarium
If you mean 3.8 Litre engine, the answer is 200 horsepower, from the factory. 225 lb/ft of torque.
There is a relay on the top of the compressor that allows the clutch to engage. Check to see if it is bad by removing the relay and use a wire as a jumper while the car is running to see if the clutch engages. If the clutch engages once the jumper is in place then the relay is bad it cost under twenty dollars to replace.
there should be a sticker under the hood of the car that tells you what the gapping should be. .60