0
With system you mean the output impedance of an amplifier. No Problem to do this, but there are really no amplifiers with an output impedance of 8 ohms on the market. All loudspeaker amplifiers have an impedance of less than 0.5 ohm. Scroll down to related links and look at "Impedance bridging - Wikipedia".
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Can you have a 2 ohm sub with a 4 ohm sub?
Yes, you can have a 2 ohm subwoofer and a 4 ohm subwoofer in the same system. However, it is important to match the impedance to avoid damaging your amplifier. You can wire them in series or parallel to achieve a compatible overall impedance for your amplifier.
Is an 8 ohm sub woofer better than a 4 ohm sub woofer?
no the higher the ohm the more resistance in the speaker the lower the resistance the more power it will use so if they are the same make the 4 ohm should be louder
Will 8 ohm sub woofers work with a 4 ohm amp?
if you put 2, 8 ohm speakers together on the same channel you will trick the amp into seeing a 4 ohm load, it is not advisable to run a 8 ohm coiled speaker on a 4 ohm amp unless you do the above. So if you want to run 2 8 ohm speakers from a 4 ohm amp this will work the best although the amp will need to be hefty as its worse to underpower a sub than overpower it! I have used a 8 ohm speaker myself on a car amp and had no problems but it was not a cheap entry level amp! some amps will take it, others will get hot and enter protection mode. Hope this helps!!!
Will two 4ohm subs running series and one 8ohm sub running parallel work together maintain a 4 6 or 8 ohm load if not how will the subs work together with a single monoblock amp?
4 Ohm subs wired in series gives an impedance of 8 Ohms. 2 4 Ohm subs wired in series, wired with an 8 Ohm sub in parallel gives you a final impedance of 4 Ohms. Speakers wired in series raise impedance, speakers wired in parallel lower impedance.
What will happen if a hook up an 8 ohm sub to a 4 ohm amp?
The sound quality won't be very good
What is difference between 2 ohm and 4 ohm sub-woofers?
It is the impedence (coil resistence)normally sub component (drivers)are in 8 ohms impedence.2 in parralel is 4 ohms and 4 in parralel makes it 2 ohms.
Can you use 4 ohm speakers on a 8 ohm system?
yes
How do you wire up a dual 4 ohm sub to 2 ohms?
i dont now
Set up 2 4 ohm sub to 2 ohm?
If you are trying to pump a 2.4 ohm sub with a 2 ohm rated amplifier you should be fine. The rating on the amplifier is the least resistance it should have on its load. Anything less than 2 ohms would fry your amp.
You have bridged kicker kx 200.2 What sub should you buy?
A Kicker cvr 10 or 12 inch DVC 4 ohm sub
How do you wire 2 8 ohm subwoofers to a 4 ohm amp?
Hook all the negatives together, and hook all the positives together. you would have 2 wires for each. one from the amp to the first sub, and another going from the first sub to the second.
What happens when you have a 4 ohm and a 2 ohm sub hooked up to an amplifier?
Yes, you can wire a 6 ohm sub with a 4 ohm sub to the same amplifier, but you need to verify that the amplifier can handle the resulting impedance of 2.4 ohms - many cannot, and could be destroyed. Also, realize that the power in the 4 ohm sub will be greater than the power in the 6 ohm sub.
