Yes it will.
However, as in all painting situations make sure the surface has been cleaned well first. Ask your paint supplier about how the surface should be cleaned depending on what product you use.
But yes it will stick. As a matter a fact it is the best thing to paint over. Generally, the duller the surface, or the less "sheen" it has, the better new coats will stick to it.
Good luck!
Latex paint can stick to the floor grouting.
no it will not stick
Yes, it will.
Not if the melamine paint is oil (alkyd) based.
I wouldn't recommend it. Some of the chemicals in the alkyd will dissolve the latex and the alkyd won't "stick". It's best to remove the latex using laquer thinner or xylene first.
NO. -It will not stick.
No, it will not stick. Use a good oil primer first.
Sure, you can fingerpaint it with watercolors if you want to. Won't stick, though.
Latex-based paints are not likely to stick to fiberglas particularly well. You'll most likely have better results from an oil-based paint.
No because latex paint will no stick to the oil stain. unless you sand the surface first then pain it
Yes, you can generally paint high gloss latex over flat latex paint. But you must do all the preparation work in the best tradition of any professional painter. All "flaking" must be removed and the raw wood primed. This will present a "smooth" surface for the new coating. Additionally, everything that is to be painted my be scrupulously clean and free of anything that will restrict the new latex from sticking to the old.
Do you mean oil based enamel, or alkyd enamel? It can, but you will have to prime it with a barrier coat of compatible primer for the new paint to stick to it. I would not recommend it though. If the latex paint has been around for a long time, you have a better chance of having your new paint last. Is this inside or outside? Is it exposed to temperature extremes? The latex paint will be able to expand and contract more than the oil based enamel. If you can imagine putting paint on a latex glove, letting it dry, then putting the glove on (stretching it) then you will have a good idea (although much more extreme) of what you are asking the paint to do. If you really must put an oil based enamel on top of latex. Use a good oil based enamel like Kilz or Zinnzer Bullseye before you paint it. After you put the barrier coat on, you will have a limited time to get the other paint on....check the directions.