When swapping injectors between Nissans VG30E and VG30ET engines, the most notable differences are in;
a) Flow Rate
c) Injector Style (Side-feed or Top feed).
In addition, the ECU must match the impedance of the injector, and the O2 sensor must match relative to the ECU. Essentially you could use any injector from any model VG30E/T from a 300zx Z31 as long as the ECU, Impedance and O2 sensor match. Easiest way to be 100% positive you are using match injectors with out research is to get the injectors, O2 sensor and ECU from the same year car either Naturally Aspirated or Turbocharged is your car is modified and has a higher fuel requirement
Also, ignore any advice from people with poor grammar and spelling. :)
The engine oil capacity for a 1987 Nissan 200SX is: 3.8 quarts for a 4-cylinder 4.0 quarts for a V6
The Nissan Silvia 200SX is a three door hatchback. The 200SX has a wheelbase of 2474mm. It has a 1.8 litre engine and is available as a 5 speed manual or a 4 speed automatic.
Yes it will fit in but it will not bolt up to transmission
The 200sx se-r chassis is the same chassis as the 200sx se. I have a 96 se-r and the only difference between mine and an 200sx SE are suspension differences and the engine itself.
The 95 200SX S14 is OBD1 EDIT the 95 200sx 1.6Liter engine manual trans is odbII says right on the underside of the hood.
Look for a removable housing at the engine end of the upper radiator hose
Noisy, and you cannot keep the engine timed.
The Nissan 200SX is offered in either a five speed manual transmission or a four speed automatic transmission. There are two version of the car and comes with either a twin-cam 1.6 liter four-cylinder engine, or a 2.0 liter engine.
Skyline is definitley more powerful. It is hard to get in the US. The 200sx has a non-turbo 4 cylinder engine (stock) compared to the turboed inline six in the skyline.
The 1.8 liter - 4 cylinder is NOT an interference engine , but the 2.0 liter - 4 cylinder is an interference engine
You will have to remove the mounting bracket that holds the engine up. It is more than a motor mount, it is the brace under the car that the engine rests on. For about 80 bucks, you can buy a frame that sits where you hood normally does to hold the engine up when you remove this brace.
You need a manual on it to show you how and it will tell you.
the horn on my '97 Nissan 200sx doesn't work. how do I fix it?
Any major brand. There is little difference in the major brands. Just make sure you use the correct weight oil.
Could be the knock sensor.
oilk sending unit on nissan 200sx located
Unplug the battery for a night, resets the whole car. However and do need to ask why you want to reset the engine light? Another answer is to buy the $100 computer readers from Advanded Auto Parts. GIEL.
why or how do i find the brake light switch on my 1997 nissan 200sx. how do i chane it out.
I have a 1997 200sx se with a sunroof.
Honda 200sx ? no such car its eather a Honda s2000 or a Nissan 200sx
that all depends on the size of the engine, if its a 4 cyl which im assuming it is then it will have four spark plugs, 6 will have 6 and so on and so forth
replace 1996 nissan 200sx se 1.6 tension pulley
The knock sensor for a 1996 200sx is located on the passenger side of the engine. It is located under the intake manifold.