No, the blocks are different.
There were both small blocks and I'm going to say, yes.
I have a set from Mondello performance i would sell Check Ebay..
No. they are different head designs.
They will bolt to the heads fine, however the 350 has a shorter deck height so the might have clearence issues with the chassis, starter, ground, ect.
They will bolt to the heads fine, however the 350 has a shorter deck height so the might have clearence issues with the chassis, starter, ground, ect.
yes i think so
Yes. 403 is a small block with identical exhaust ports as a 350 and 330.
Yes, an Olds 350 will fit if it's the rear wheel drive Supreme. It is the same basic block as the Olds 307 c.i. engine that came with some Cutlasses. Another option was the Chevy 305 which of course is the same block as a Chevy 350 (another possible option) if you are so inclined. An Olds 307, 330, 350, 403, or even a 455 will fit. The 455 will be tight and will need specific headers for the exhaust. Any Buick, Olds or Pontiac (BOP) will mount to your current transmission. If you go with a Chevy block you will need a adapter plate or a Chevy transmission. v6 and v8 engine mounts are different...so you will also need to change them
The blocks were physically the same size so I don't see why not.
There is someone with a Olds 455 in his Fiero, but he had to remove the trunk.
Buick Olds th400 or th425 (front drive) or dual pattern case th350
with enough welding, fabrication, and beating, anything will fit anywhere. i fit an olds 455 rocket into an s10 blazer. anything is possible if you have the time, ability, and patience.