Yes, they will fit, and increase torque by a good amount. However, the Vortec heads used a vertical intake bolt design, so you will not be able to use your intake manifold. Side note on the vertical intake bolts, you also need to get Vortec specific intake bolts, because they bottom out in the heads to stop from overtightening and seal better. All in all, vortecs are a good purchase, if you have the money for a new intake manifold. Edelbrock makes some great ones specifically for vortec heads on older engines. look into it. hope i could help.
no they will not
== ==
Yes , but you will need a tbi intake to fit vortec heads if you retain the 90 TBI fuel system.
will 1995 Chevrolet 350 intake fit a 1997 vortec heads
Yes they will. The bore is 3.785 so they wont hit
No it will not, Totaley different.
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
yes they will fit, but you will need an intake manifold compatible with vortec heads if you plan on reusing the carburetor
a 350 is a small block those heads will fit on and Chevy SMALL block not a big block
350 heads will bolt to the 400 block. They will need to be drilled for the "steam ports" in the 400 block.
Yes the heads will, But the problem is that the vortec intake won't bolt up to the pre- 90 heads. DIFFERENT BOLT PATTERN.
no