Usually it was whale oil or seal oil.
The New England colonists soaked cloth or paper in whale oil or melted lard to use for windows. Glass was expensive and hard to obtain in the colonies.
If you are asking about Oil Cloth, it is not made from oil, it is a plastic covered cloth that repels oil. There are fabric products made from petroleum products, but they are not made directly from oil.
whale oil r seal oil
Linseed
Can range from oil and a rag to sand blasting. <><><> Agree with above. There is rust, and there is RUSTED. For light rust, start by soaking the METAL parts in a light oil, such as Rem-oil, or 3-in-1 oil (Special products such as Kroil are great if you can find them). Do NOT soak wooden parts in oil. After several hours of soaking, rub with a clean cloth, changing to a clean part of the cloth as rust gets on the cloth. For heavier rust, after soaking use a BRASS potscrubber, then the clean cloth. Do not use chemical rust removers, such as Naval Jelly- bluing is a form of controlled rusting, and they will strip bluing in a matter of seconds. Really heavy rust may require sanding, filing, bead blasting- best left to a gunsmith. and never ever soak it in wd-40 that is one of the worst things you can do to a gun.
Monoi oil is made by soaking of the pedals of the Tahitan gardenias, also known as Tiare flowers, in a semi-wax coconut oil. The word Monoi means "scented oil".
AnswerYou would want to use something that dissolves the glue remnants without removing the stain. Try soaking the area with tung oil, Olde English oil or similar product. Let sit a few minutes and you should be able to gently scrape it off. Remove excess oil with a clean, dry cloth. Paint thinner werx well for removing tape glue from painted or stained surfaces. Use a cloth with your pointed finger rubbing in circular motion.
metal steel alu plastic fiberglass glass rubber leather cloth fabric oil water glue
Take your cloth, usually canvas and brush, spray or dip it in linseed oil and then hang to dry. It make take several applications.
Linseed oil is ideal for use on cleaning stained cabinets. Never use linseed oil on painted cabinets. Cover the floor with a drop cloth and open the doors and windows for ventilation. Wipe the cabinet down wit a soft, dry cloth and vacuum crevices to remove all particles. Mix together equal parts linseed oil and white vinegar. Wet a soft cloth in the solution and clean the cabinets, going with the direction of the wood. Use an old toothbrush to get in corners and crevices. After cleaning, allow to completely air dry and then buff with a soft, dry cloth to restore shine. There is no need to rinse after washing.
Yes but it will bleed
oxyclean!!