Brakes and Tires
Brake Pads and Rotors
Chevy Silverado

Would you put the bigger brake shoe on the front or the back of the back brakes for a 1994 Pontiac grand am?

313233

Top Answer
User Avatar
Wiki User
Answered
2005-10-17 13:23:22
2005-10-17 13:23:22

the big/longer shoe generally(99%) goes to the back.(check mnufacturers specs) try www.autozone.com

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


Remove the tire and wheel from your 2002 Pontiac Grand Prix. Remove the spring from the brake shoe. Remove the brake shoes. Reverse the process to install the new brakes.




The emergency brakes are whatever your rear brake pads are.


Visit the forums at genvibe.com. There is a nice walk through with brakes to service your front brakes.



what is the torque spec for a 2005 Pontiac G6 Gt brakes


Remove the 2006 Pontiac Montana wheel and tire. Remove the brake pad Springs. The brake pads will come off. Reverse the process to install the new brake pads.


You will need to remove the tire and wheel from your 1998 Pontiac Grand Am. Remove the brake assembly spring from the brake pads. The brake pads will come off. Reverse the process to install the new brake pads.




Brake rotors or drums need to be machined or replaced. If it causes steering wheel shaking, check front brakes. If happens when applying parking brake look to rear brake problem.


There could be an issue with the anti lock brakes if it equipped with them. It could also be that the brake fluid is low or the switch for the emergency brake is broken.


The best place to have your brakes replaced at would be Midas they would be able to replace both your brake shoes and even brake calibers if they need replaced.


if you are talking about brake as in like fourwheeler brakes or car brakes the rubber part would be called the brake pad


The minimum thickness of a brake rotor on a 2006 Pontiac Grand Prix is 1.25 inches. Below this point, the brakes will be less effective.


I have a 2000 pontiac grand am gt 3.4 auto trans with rear disc brakes how do i adjust the emergy brakes no adjustment under car how is is done?


To replace the brakes, lift the car on a jack, remove the tire, brake shoe and old brake pad. Next put in the new brake pads, put the brake shoe and tire back on the car, and lower the car.



You need to bleed the entire brake system. Bleed in this sequence, RR, LR, RF, LF. If you do not know how to do this, do a search online for "bleeding brakes" THE REAR WHEEL CYLINDERS MAY BE LEAKING SHOULD ALWAYS CHANGE WHEN DOING BRAKES AND BLEED REAR BRAKES


The only part that is needed to replace your 1997 Pontiac rear brakes is a break assembly kit. The brake assembly kit will have everything you need.


Around $500 for front and rear brakes


Your Pontiac has a problem in the electronic block, which is controlling the turn signals, the tail and brake lights and etc. It shouldn't be a big deal.


i have a Pontiac grand am 2002 se and i just changed my brakes and the brake lines have 2 washers on them


I would check rear brakes that is a good sign that they are wore out I would check rear brakes first sign of worn out brake is that the E-brake doesn't hold



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.