Headlights Tail and Brake Lights
Mazda Miata
VW Polo

You Cant get reverse lights to work on peugeot 206?


Top Answer
User Avatar
Wiki User
2007-04-30 18:52:23
2007-04-30 18:52:23

Could be switch on gearbox, wiring or bulb.


Related Questions

for reverse lights, check the reverse light switch that is located on the transmission. for fog light, check bulbs, or broken wires for reverse lights, check the reverse light switch that is located on the transmission. for fog light, check bulbs, or broken wires

head lights won't work, no power to them, signal works , reverse lights work

Try bypassing the reverse light switch that plugs into the transmission. If your reverse lights come on, voila! Problem solved. Buy a new switch.

The problem is the reverse light switch. It is located on the top of the transmission that should sloved your problem.

Replace the bulb first, if this does not work try the reverse switch.

If the back lights on a Peugeot 206 are not working, make sure the bulbs are new. If the bulbs are not the problem, there could be an issue with the fuse.

check nutral safety switch

what to do if my reverse lights on my 1993 gmc 1500 truck wont work

Sounds like a Ford! Brake and reverse light not functioning will keep vehicle from leaving Park!

there is no fuse for the reverse lights check the netural safety switch it may be out of adjustment or shorted.

There is probably a reverse light switch on the transaxle that is bad or unplugged

The backup lights on a 67 Camaro won't work if the bulbs have burned out of the shifter is misaligned. The lights come on automatically when put in reverse and will not function properly unless the shifter triggers the reverse sensor.

The 2002 Cavalier has a reverse light switch. The switch can be bad, or have a loose connection causing the lights not to work.

check fuses, check bulbs, from there see if there is a grond for your reverse lights that may need cleaning. If still no lights, make sure there is a good wire back to the transmission for your lights. Still no luck, look into the sensor on tranny for your reverse lights. Good luck.

sometimes when the lights blow out the fuse also blows out. check the fuse!!

presuming you've checked all the fuses and relays theres a sender switch on the transmission should have 2 wires attached to it.. make sure the wires are not disconnected or damaged

If the lights work a little but appear dim then i would suggest a dodgy earth?

There is a backup switch in the gearbox. When you shift into reverse, the gear box switch contacts the switch and lights the white reverse lights. If you find that the reverse lights don't work it could be that the switch is not being triggered by the mechanism inside the gearbox. This is providing that everything else is working; wiring,bulbs,etc.

A blown fuse, a faulty ( or dirty ) reverse light switch, faulty wiring, a blown bulb or a poor ground could cause reverse lights not to work. If one light doesn't work it's likely to be a blown bulb, faulty wiring or a poor ground. If both don't work it's probably a blown fuse, a faulty reverse light switch or faulty wiring.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.