Yes as long as its free
Mazdatruckin.com has a schematic for the B2600i vacuum lines in their tech section, it includes 4wd and cruise control devices. See the attached links below.
There is a sticker under the hood somewhere that will show you where thay go.
i took vaccum lines apart on 1985 eldorado please show me diagram
How do I? I get a schematic of the vacuum lines ( either online or in a repair manual, such as Haynes or Chiltons). You need a good work light, some are hard to find. Go along and check each line according to the schematic. To trace a leak from a vacuum line, it is recommended to change all lines. You can get a package of assorted vacuum lines at VIP for cheap, they also sell the T's and splitters. To check a line for a leak, if it is not obvious with the vehicle running. Check one line at a time. Take one line off, but your finger on one end to block it and blow into the other end. Put it back on before checking the next.~Big PaPa Ford Know Best...
Vacuum lines supply vacuum for various functions.
I don't know where you can get a schematic , try calling some smaller auto wreckers. They might have one that you could take a look at.
The vacuum lines, in a 1993 Honda accord, are controlled by a vacuum pump. The vacuum pump regulates the proper pressure in the vacuum lines.
go to chevythunder.com, they have exactly what you are looking for
where do the vacuum lines go on the 91 4runner
Replace all vacuum lines.
: You can find a schematic of the "Routing" of vacuum lines "Pasted" under the hood of your car, or on the "Top Rail" above the radiator frame. If not, you can purchase an aftermarket manual (chilton or haynes) at your local Auto Repair Store.
Remove the hydroboost unit from the firewall and replace it with the vacuum assisted booster. If you are careful you may be able to do this without disconnecting the brake lines. You will need new powersteering lines and find a vacuum source for the new booster.