answersLogoWhite

0


Best Answer

remove fan assembly (allen head bolt is in the back in a hole) - Jay 2004 passat tdi

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: You are replacing the alternator on a 04 passat tdi the lower bolt is to long to clear the fan what is the easies way to remove the alternator?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove alternator in a 2000 Ford Expedition?

What causes the generator to burn out after replacing the alternator


Instructions on replacing a Buick Regal alternator?

Disconnect the Regal battery. Remove the alternator belt. Disconnect the alternators wiring, then unbolt and remove the alternator. Reverse the procedures for installation.


How do you change an alternator on a 96 Passat GLX VR6?

i also own a 96 passat GLX VR6 and it is alot of work to change the alternator in a vr6 you pretty much have to take the front of the car off you need to remove the headlights to get to the raidator then you have to remove the radator to get to the alternator from there its a pretty simple process you need to remove the belt from the alternator then remove the bolts that hold it on and put the new one on and use a screwdriver to replace the belt onto your new alternator then you have to put the whole front of the car back on hope that helps


How do you get the alternator out of a 2002 Volks wagon Passat when there is enough room to remove it?

I just had my alternator replaced (at a shop). They told me the mechanic had to "rip the entire front end off" to get to it.


2000 Chevrolet truck replacing alternator s10 rebilt alternator?

Disconnect the battery. Remove the air inlet tube. On some s10s, there is a bracket above the alternator that needs to be removed. Take off the serpentine belt. Remove the alternator wiring, then the bolts. Remove the alternator and install the new one.


Replacing Alternator on 2000 S10 truck rebuilt alternator?

Start replacing the 2000 s10 alternator by disconnecting the battery. Remove the air inlet hose, and the serpentine belt. Take off the bracket over the alternator if it has one. Unbolt the alternator and disconnect the wires. Reverse the procedure to install the new alternator.


How do you replace the alternator in a 2000 Chrysler Sebring convertible?

When replacing the alternator on a 2000 Chrysler Sebring convertible begin by removing the belt. Next, remove the wiring. Lastly, remove the retaining bolts. Reverse the process to install the new alternator.


How do you remove the passat rear bumper?

how to remove 2013 passat rear bumper


I am replacing the alternator on my 1994 Mazda MX6. I have got the alternator unbolted but I can not remove the alternator through-bolt because it hits the bulkhead. Is there a method to remove bolt?

You don't need to remove the bolt. The mounting bracket is slotted so that you only need to withdraw the bolt a small way and then pull the alternator and the bolt will come out through the slot.


How do you change alternator on 1999 Firebird?

Purchase a new alternator and you will see what bolts you will need to remove. Disconnect the Negative Battery cable before starting any work on replacing the alternator. Remove the serpentine belt -- that's that belt going accross the alternator, I think using a 15mm wrench on the tensioner will let you pull it back enough to get the belt off so you will be able to remove the alternator. remove the quick connect connector from the alternator remove the bolts securing the alternator, they are different sizes so try to remember where they go, or put them back in the holes until you are ready to put the new one in. remove the positive terminal from the alternator simply reverse this procedure to install it


How do you remove oil pump from a 99 VW Passat 1.8T?

how to remove oil pump for 99 vw passat.


Instructions for replacing alternator in 2003 f-350 6.0 liter diesel?

disconnect batteries. alternator sits on top of motor. disconnect electrical connectors from alternator remove 3 bolts from alternator remove upper fan shroud replace with new alternator to put serpantine belt back on use a 1/2" breaker bar to pull tension pulley