you would need to change the cylinder heads also.
See link below
No. You can remove the engine and leave the transmission in the vehicle.
Begin by removing the engine wiring harnesses. Remove the motor mount retaining bolts. Disconnect the engine from the transmission. Lift the engine out.
how to remove the starter from a 92 s-10 4x2 with a 2.8 engine
With great difficulty.
Remove you glove box. It should be behind it.
Follow the upper radiator hose from the radiator to the engine. It will lead you to the thermostat housing. Drain coolant from radiator, remove upper radiator hose from engine, remove the two bolts holding the thermostat housing to engine, remove housing, remove thermostat.
remove the hose and look into the housing the thermostate should be there
how do you remove the dashboard of a 2002 Chevy blazer
Need to remove the air filter top and look down in the top of the TBI. It looks like a carburetor but it is not. It is called a throttle body injection. You will see 2 injectors that spray fuel in the engine Start it up and look UNDER STAND.
the only way i could figure out how to get the starter out was to remove the right engine mount
how to I remove the overhead console on the S 10 Blazer?
Follow the top radiator hose to the engine and you will see were it clamps onto a housing that's bolted to the engine. Remove that housing and it will be there.