0
You have a engine light reader and its coming up multiple cylinder misfiring besides plugs wires coils and fuel pressure what could cause this 1998 mountaineer?
Wiki User
∙ 18y ago
Clogged injector, burnt valves, blown head gasket, bad intake gasket. spark plugs.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
What is random multiple misfire on 2008 Chevy Tahoe?
The P0300 code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are a common cause of multi-cylinder misfiring. If no leaks are found the next step is to replace the spark plugs. If the problem persist more tests needs to be done to diagnose problem.Possible causes,Faulty spark plugsFaulty ignition coilsClogged or faulty fuel injectorsIntake air leakFuel injectors harness is open or shortedFuel Injectors circuit poor electrical connectionIgnition coils harness is open or shortedIgnition coils circuit poor electrical connectionInsufficient cylinders compressionIncorrect fuel pressure
Where is the fuel pressure regulator in a 2000 mercury mountaineer v-8?
were is fuel regulater 2000 mountaineer 5.0
What can be the problem with a 2008 crown Victoria misfiring on number four cylinder?
Moisture in the COP (coil over plug) boot/assembly, bad coil, bad plug, bad injector, poor fuel pressure, poor cylinder compression. Or damaged coil boot causing the coil to flash over.
Where is the low pressure port on your 1998 Mercury Mountaineer?
The low pressure port on a 1998 Mercury mountaineer is located on top of the ac drier. The drier is mounted close to the radiator on the passenger side.
Where is the low pressure port on a 1997 mercury mountaineer?
left side of
Does the trigger of a pneumatic nail gun is responsible with its pressure?
The trigger of a pneumatic nail gun has nothing to do with the pressure. The pressure exerted is generated by the compressor and then the impact hammer inside the cylinder of the nail gun. If you are having a no firing or misfiring problem the 'o' ring around the piston is possibly broken or dry . -Have you been regularly using air tool oil, - NOT oiling is the commonest reason for this failure.
What pressure will a scuba cylinder with a rated working pressure of 3000 psig be exposed to during a hydrostatic test?
The test pressure is always stamped on the cylinder along with the working pressure, physical volume, manufacture date etc. It is generally about twice the working pressure of the cylinder.
What is low oil pressure?
Oil Pressure Sender and SwitchFord Ranger/Explorer/Mountaineer 1991-1999http://www.autozone.com/servlet/UiBr...3d800d46de.jsp
How do you know the difference between the high pressure power steering line and the low pressure line on a 1998 Mercury Mountaineer?
High pressure line gets very hot.
What is the pressure of a full nitrogen cylinder?
...whatever pressure it was filled to...
What is filling pressure in lpg cylinder?
Filling pressure in lpg cylinder is 14 kg/cm2 to 16kg/cm2 . maximum filling pressure is 16.95kg/cm2
How can the presence of a non-condensable material in a refrigerant cylinder be detected?
comparing the cylinder pressure and the temperature to a pressure-temperature chart.
