0
You have turn signals running lights but no brake lights in a 1999 gmc suburban?
Wiki User
∙ 15y ago
More than likely, you need to replace the stoplight switch. It is not a diificult change. Look under the dash directly where the brake pedal comes in contact with the dash when it is not depressed. Press the brake and notice the little contact nipple that pops out. That is the stoplight switch. Replace that, and you are good to go!!!
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you Disable Daytime Running Lights on a 98 Suburban?
slightly apply the E brake
1997 suburban Brake lights and turn signals work but tail lights dont what do I do?
Brake lights and turn signals are on a separate circuit from the tail lights. Tail lights are on the same circuit with the dashboard lights. If the dashboard lights aren't working either, check the fuse. If they ARE working, check the headlight switch.
Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?
No brake lights but turn signals work? Turn signal switch brakes route through it.
What fuses are responsible for turn signals and brake lights in a 1983 Suburban?
Turn signals use a relay or 'flasher' which is usually located on or near the column under the dash. Brake lights get their power thru the brake light switch on or near your brake pedal under the dash; check it with a 12v circuit tester.
96 Chevy Suburban no dash lights and no tail lights Any suggestions Turn signals brake lights etc work fine?
my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.
How do you fix running lights on 1990 Buick Century Brake lights and turn signals and hazards all work Just no running lights?
I have a chev cavlier 1995 and the running lights do no work---on the dash the green light keeps blinking----what should I do?
2007 dodge ram 2500 4x4 diesel brake lights not working third brake lights does. running and turn signals work. and all trailer lights work?
we are having back brakes problems
What will cause brake lights not to work or running lights do have turn signals?
A blown bulb. Check fuses and then start replacing the bulbs one by one.
Your 1997 Suburban turn signals on the dashboard blink rapidly and but the back signals lights and brake lights don't work Bulbs and fuse are ok what should you do?
Answer Usually when the flasher blinks rapidly it's about finished. Try replacing the signal light flasher and see what happens. If you still don't have Brake Lights start looking for a short.
My brake lights or turn signals don't work on my Cadillac deville?
How do you replace brake lights
How can you fix your 1997 Chevy Suburban the head lights hazards turn signals and brake lights do not work and the fuses are good please advise?
May possibly be in the multifuction switch on the left of the steering column!!!!
Brake lights out on 1997 Suburban fuse is good Tail lights turn signals and hazard lights work I checked the fuse its good?
check the brakelight switch. it is located under the dash where the brake pedal rests. Hey its ritchie. If you can click your blinker down and then they work its you blinker switch,but this is my monte.
