Want this question answered?
6 bolts hold the transmission to the back of the engine.
take the bolts out and it should come out take the bolts out and it shold come out
if it bolts up maybe
yes
I don't believe so , it is not an interference engine
It is located behind the fan and mounted to the engine block with 4 bolts.
Follow the top radiator hose from the radiator to the engine. The housing it is clamped to has a small bell with 2 bolts where it is bolted to the engine. Remove the hose clamp and the 2 bolts. You will find it inside that part.
on the (overhead valve engine) short bolts 43ft-lbs, long bolts 46ft-lbs. then an additional 90 degrees. on (overhead cam engine) short bolts 30ft-lbs, long bolts 26ft-lbs then an additional 90 degrees
on the right side of the engine above the water pump. it is held in by 2 bolts
if the engine is an 8 valve it is behind the timing belt cover and if its 16 valve its on the front of the engine (os) in a housing with 3 bolts
On a 1995 corvette the oil filter is located behind a shield at the bottom of the engine that looks to be held on by 4 bolts. This shield must be removed to locate the oil filter which will be obvious and located to the left side of the engine.
2 bolts