Want this question answered?
you will need to buy a line converter. the line converter take the output to the speakers and turns into a rca signal. from there you connect that signal to amp. you will want to run the remote wire to the amp from a 12v source inside the cab. probably from the fuse box at either the radio fuse or accessory fuse. if you use the accessory fuse you will want to put a switch in the wire so you dont drain the battery down on accident. hope this helps/
Right click on the series in the graph. On the shortcut menu, click "Add Trendline". You can then choose the style of line you want and the series you want it for. Then click OK.
To add a contact, type the phone number you want to add. Then select options, and "add contact." Type in the name of the contact, what device the number is for, and any other information you want to add.
If you want to use a number line to add and subtract, it can be done with a slide rule. But it is much easier to use an electronic calculator.
Run a fused HOT line from the fuse block to the switch under dash - the other end to the cooling fan
Click on the music tab that runs along the same line as the home tab. Then search for the song that you want and click add.
No you should listen to the add they make you want to upgrade to the next in line.
Find the Line Rider program files, find the music folder, put any mp3s in it. This works on Line Rider 2 Unbound only. If you want to add music to the online one, do a video screen capture and add music in Windows Movie Maker, too much trouble! In my opinion.
I bought what is called an "Add A Circuit" fuse link. This thing has two slots for 10 amp fuses and plugs into the "Door Sw Defeat" fuse slot. It also has a wire coming off it to add another line to it. What I did was pull the 10 amp fuse out, plugged in the Add A Circuit and plugged the fuse into the second opening of the new dual fuse holder. Then I installed a toggle switch under the dash near accessible only when the glove box is open. From the toggle switch, I connected a ground wire to it, grounded that to an existing metal screw, and the other wire connected to the wire coming from the dual fuse holder. Flipped the switch and the light turns off. The total cost was, $1.19 for the toggle switch and about 5 bucks for the Add A Circuit connector. Piece of cake! Good luck! I bought what is called an "Add A Circuit" fuse link. This thing has two slots for 10 amp fuses and plugs into the "Door Sw Defeat" fuse slot. It also has a wire coming off it to add another line to it. What I did was pull the 10 amp fuse out, plugged in the Add A Circuit and plugged the fuse into the second opening of the new dual fuse holder. Then I installed a toggle switch under the dash accessible only when the glove box is open. From the toggle switch, I connected a ground wire to it, grounded that to an existing metal screw, and the other wire connected to the wire coming from the dual fuse holder. Flipped the switch and the light turns off. The total cost was, $1.19 for the toggle switch and about 5 bucks for the Add A Circuit connector. Piece of cake! Good luck!
AnswerNO. What will you do when the fuse burns out?That fuse holder was designed into the system for a good reason, to make it simple to replace a burned out fuse. Now you have made it much harder to do a simple repair job.Answeryes because even if the fuse burns out again alls u gotta do is desolder it then sodder a new fuse in. also i would add more wire because that old wire mite not survive a lot of soldering and desoldering and bending
I don't quite understand your question. If you mean you want the additional map packs/add-ons, then yes. If you mean the mini game itself, then no.
You dont... The engine oil and gearbox oil are the same thing, so if you want to do this, then just do a normal oil change!