could be , is the water level above the skimmer/s / are the skimmer baskets clean/? pump may have just lost it's prime. fill pump with water replace lid and restart.
if the motor is running but there is not pumping water; # It may need to be primed, that is there is no water around the impeller and as a result is not pumping. to get it going if that is the problem fill the pump with water if possible and make sure there is no blockage on the pool side, then start the pump sometimes it helps to turn the pump on and of while the air is being expelled. # On the other hand the impeller may be damaged blocked or no longer properly connected to the motor if there is no movement in the water at all that is probably the problem.
my gas gauge is not working what could be the problem
Well this could be a serious problem. You should see a doctor at once. You may have an intestinal blockage.
the problem could be that the enegn is jamed
Any number of things could cause a Yamaha Raptor 660 not to start including a blockage in the fuel hose. There could also be a problem with the carburetor.
My dashpanel lights stopped working in your Chevy Monte Carlo ss 2001 what could the problem be
blown fuses
the side indicators are not working....
Well, you may have a kidney stone or blockage this blockage could be the problem blockage is usually when there's something lodged or stuck in your large intestine or you may just be having cramps. * ask your doctor!!!!!
There could be a ground on the body of the vehicle. If this isn't the case there could also be a problem with the relay that go to the indicators.
Spillage
Could be a number of reasons. There may be blockage which prevents air from flowing over the fins of the condenser. There may be a blockage elsewhere in the AC system. It could be insufficient refrigerant. You can try cleaning off your condenser (I would not recommend using a pressure washer for this, whatever you do - condenser fins are brittle and bend easily). If that doesn't rectify the problem, you'll need to take it into a shop and have a system performance test conducted.