0
check fuses to see if any are broken and replace with proper amp
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Is there a relay that controls the power seats in the 2000 Bravada and where is it Both seats stopped moving at the same time Seat heater and lumbar still work?
Check your manual. There is a fuse for the seat motors, pretty sure it is independent of anything else.
Where is the fuse panel on an ml320 and is it a fuse if the passenger power seat wont move and the driver seat is okay?
I have the same problem on a 2000 ML320. The power passenger seat stopped moving and the fuse/relay panel has nothing labled as power seats.
Is there a separate fuse for the power seats and heated seats in a 2000 bravada?
Yes
How many seats do Toyota MR2 cars have?
Toyota MR2 cars have 2 seats and were produced in Japan. From 1986, seats were available in leather in addition to the original option. Production of these cars stopped in 2005.
Does a 2000 neon have power windows in front and back seats?
All have back seats and some have power windows and some don't. Depends on the model.All have back seats and some have power windows and some don't. Depends on the model.
Where is the fuse located for the power seats in a 95 Blazer?
Power seats, power windows and power door locks are not fused. They would have a relay and or a circuit breaker. It should be in your owners manual.
Why won't the power seats work on my Mercedes c280?
The convenience relay that is located in the trunk of a Mercedes C280 may need to be replaced if the power seats are not working. Bad or loose wiring can be another cause for power seats to stop working.
How do you remove seats in Chevy Venture?
Locate the bolts at the base of the seats and unbolt them. You'll have to disconnect any electrical connections if you have power seats.
Where is power seat fuse in Subaru Legacy?
There is no dedicated fuse for the power seats.
Can you switch the seats in a 2007 dodge ram 1500 with the seats in a 2005 Ram 1500 with little to no modification?
You can switch the seats From a 2007 dodge ram to a 2005 with little to no problems. Switch in the seats are easy they bolt down with no problems, but the seatbelts will not work plug for the power seats will need to be modified. I switch the seats of my 2005 to 2007 quad cab last week. I did not have the power seats working yet And I had to switch the seat belts From the seats on the 05 to the seats on the 07.
Is there some place on the web where you can get a wiring diagram for hooking up power seats?
-------------------------------------------------------------------------------- Upgrading to power or power/heated seats (Laredo models) Power or power/heated seats can be added to most WJ's that came with standard seats. The entire seat assemblies will have to be exchanged. All seats use the same bolt pattern so the installation fit will always be exact. For power seat wiring, all that is required is a constant +12V wire and a Ground wire. Vehicles that came without power seats are not pre-wired. For the Ground wire it is probably best to run it over to the center console area where it can be attached to a metal bracket. Do not drill a hole in the floor below the seat. For the power lead, run a wire with an in-line fuse up to the fuse panel area where you can find a + wire to tap into. http://www.wjjeeps.com/seats/seats.htm
What's in the sr5 package?
Power options: Power Windows, Power Locks, Cruise Control, Power Mirrors, Power Seats
