Headlights Tail and Brake Lights
Jeep Grand Cherokee Limited
Ford Escort ZX2

Your tail lights do not work on your 1995 Chevy lumina but your brake lights work what is the problem and how do you fix it?

181920

Top Answer
User Avatar
Wiki User
2008-02-18 16:41:19
2008-02-18 16:41:19

If both the dashlights and the rear parking lights were not working try this.

Look at the parking lights fuse ( 25amp) on drivers side fuse box under the hood you will find that the wire has corroded going into the fuse box. I installed a new fuse holder and spliced into the wire coming into fuse block.

12
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Your problem may be with any or all of these three items: The fuse, brake switch or bulbs in the brake lights.

User Avatar

It depends on the exact problem. If it's that both brake lights in the back do not work and the middle one works, it could be your turn signal switch.

User Avatar

TRY TURNING THE EMERGENCY FLASHERS ON AND OFF A COUPLE TIMES THEN CHECK YOUR BRAKE LIGHTS. WORKED FOR ME.

User Avatar

brake light switch, it is typically located above the brake pedal somewhere on the brake pedal arm

User Avatar

How do you adjust the parking brake on a1994 Lumina?

User Avatar

turn signals work butt the brake lights dont can anyone help please? cant afford a mechanic.

User Avatar

the blinker switch shorted out the brake lights... really really common problem, need to replace the switch

User Avatar

It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.

User Avatar

Yes they indeed have brake lights...

User Avatar

Above the brake pedal. If your main brake lights dont work but your third center brake light does, then the brake light switch is not the problem. Its is the turn signal switch.

User Avatar

Its most likely the brake switch. Its a plunger like switch on the brake pedal. Its pretty easy and cheap to change.

User Avatar

Remove the tire and wheel from your 1994 Chevy Lumina. Remove the brake spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.

User Avatar

Bring to a shop that has an ABS scanner to determine the problem

User Avatar

I have a 92 lumina 3.4 Mine was above the brake peddle

User Avatar

Purchase the Haynes Manual for the Lumina it has all diagrams you may need.

User Avatar

possible air in the brake lines.

User Avatar

If emergency brake is on 1 click it turns daytime running lights off. Pull out on emergency brake handle and see if this fixes the problem.

User Avatar

You've got something wrong with your wiring, causing current to jump from the indicator circuit over into the brake light circuit.

User Avatar

Check if the male and female plugs are snapped into place tightly. And check if the lights or fuse is burnt out.

User Avatar

If a 95 Chevy Suburban's brake lights do not work but everything else does, it may be the link that connects to the pedal that has a problem. If the pedal has been adjusted or disconnected, it may also be a reason for the issue.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.