0
form_title=Coil and Strut Replacement form_header=Keep your car running in tip top shape! We will help find you an auto expert to replace your coil and struts. What is the year, make and model of your vehicle?=_ What kind of driving do you normally do, road travel or more offroad? = {} Have you ever had any coil and strut replacement done on your vehicle before?= () Yes () No () Not Sure Describe the problem in detail.=_
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you replace front coil spring ford escort 98?
To replace the strut you have to jack up the car on the side you want to do and take off the wheel. Then, take it loose from the strut tower on the top. There are 3 or 4 nuts. Then take it loose from the steering knuckle on the bottom. The whole strut assembly lifts out. To replace the coil you have to have a strut compressor. It compresses the coil spring so the top of the strut can come off. Once the top of the strut is exposed the coil can be taken off the strut.
What does a strut look like?
A strut looks like a shock absorber inside a coil spring.
What is the difference between a shock and a strut in a car?
A strut is a combination of a shock absorber and a coil spring
How do you replace strut and coil spring on Nissan 300zx?
replace coil springs in a nissan 300zx
What is the cost for a strut replacement in a Kia Sephia?
The cost for the strut replacement in this car can range between $50 and $200+. It will depend on the brand of the part, and if a person does it on their own.
How do you change the back struts on your 1999 Buick Regal?
Strut replacement is very straight forward. Unbolt the top of the strut under the hood and the bottom of the strut attached to the spindle behind the tire. Remove brake line and remove strut. Replace strut cartridge. Assemble in reverse order. WARNING: To replace the shock part of the strut you must remove the large coil spring around it. You MUST have a coil spring compressor to do this. DO NOT take the top off the spring without first compressing the spring or the spring will fly off and most likely take your hands and anything else in the way off with it. Yes it is dangerous.
If a spring breaks on a strut can you only replace the spring on a Ford Windstar?
Yes. It is possible to purchase just the coil. Entire strut / coil assemblies can also be purchased for a very simple unit assembly as well.
How do you change the front coil springs on a Honda accord?
Use a strut spring compressor to compress the old spring, the remove the strut from the spring. Use the compressor to put the strut into the new spring. Install the strut and spring into the vehicle.
Is it necessary to compress spring coil to replace rear strut?
Normally, yes.
Eb falcon coil replacement?
You can buy the EB Falcon coil replacement at the online websites like Ebay.
How do you replace the rear shocks on a 02 Nissan altmia?
1. Remove or disconnect the following:Rear wheels from the vehicle and support the rear axle with a jackStrut lower mounting through-boltsNote: Be sure to note the position the strut upper plate to the vehicle for reinstallation purposes.2 nuts from the top of the strutStrut as an assemblyNote: Do not remove the center locknut from the strut assembly until the strut is safely compressed.2. Compress the strut coil spring with a spring compressor.Strut assembly center locknutNote: Before removing the strut from the coil spring, note the positioning of the strut in relationship to the coil spring for reassembly.Strut leaving the coil spring compressedNote: Mark the coil spring position to the strut assembly for reinstallation purposes.3. To remove the spring from the strut assembly, perform the following steps:Compress the coil spring with the proper compressor tool.Remove the center retaining nut holding strut mounting insulator.Slowly decompress the coil spring.Remove the strut mounting insulator.Remove coil spring.To install:1. Install or connect the following:Coil spring onto the strut assembly. Be sure to align the matchmarks made during the removal procedure.Strut mounting insulator and compress the coil spring assemblyNote: It will be necessary to use a new locknut for the center retaining nut of the coil spring.Center retaining nut and torque to 43-58 ft. lbs. (59-78 Nm). Be sure the spring is seated properly on the strut and in the mounting insulator.2. Slowly remove the spring compressor tool.Strut assembly and torque the upper nuts to 31-40 ft. lbs. (42-54 Nm)Lower strut through-bolt and torque to 123-137 ft. lbs. (167-186 Nm)Note: Be sure to hold the through-bolt and tighten the nuts.3. Install the wheels, lower the vehicle and perform a front end alignment.
How do you change strut bearing on Ford Taurus?
Since the strut bearing is part of the strut-coil spring assembly, the whole thing will have to come out and be disassembled. See "Related Questions" below for extensive information on these procedures.
