0
What else can I help you with?
How do you change a serpentine belt on a 1990 Cadillac Sedan Deville?
changing serpentine belt and pulley 90' sedan deville
How do you loosen and or tighten the drive belt on a 1990 Ford Thunderbird?
You can't, the belt is called a serpentene belt, you have to replace the belt.
1990 ply sundance 2.5 lt squeal drive belt. how to stop it.?
If the drive belt is squealing, then one of two things is wrong. Either the belt is loose or it is worn out. Adjust the belt tension or replace the belt.
Does the 1990 Toyota Corolla ac compressor operate from a separate drive belt or the serpentine belt?
it has its own belt. it looks like a serp belt but it isnt. its just a ribbed belt.
How do you change the belt on a 1990 Cadillac Seville?
Insert a 1/2 inch pull handle into tensioner and pull toward front of car to release tension. Remove and replace belt. Be sure to route belt correctly.
How do you change the serpentine belt on a 1989 Cadillac Eldorado?
How Do I change the serpentine belt on a 1989 Cadillac Eldorado ?
How do you release the tension on the serpentine belt pulley of a 1996 Cadillac eldorado?
1) Rotate drive belt tensioner mechanism upward, away from drive belt using a 1/2 inch breaker bar. 2) Remove serpentine drive belt. 3) Reverse procedure to install.
When do you replace the timing belt on a 1999 Cadillac Seville?
The 1999 Cadillac Seville does not have a timing belt, it has a timing chain.
Do you have a Drive belt diagram for 1990 dodge colt vista?
this question should be under dodge automobiles
How do you get the serpentine belt at proper tension on 1990 Suburban after replacing alternator?
Some where in the radiator shroud or engine compartment there should be a serpentine belt diagram. Follow diagram or picture. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley. also the pulleys the smooth side of the belt goes on the smooth pulleys the belt side with the teeth go on the pulleys with the teeth
How do you change the serpentine belt on a 1990 Plymouth Acclaim?
loosen the tensioner assenbly with a 1/2" drive ratchet or a serpentine belt tool and reinstall the belt according to the diagram under the hood
How do you replace the serpentine belt on a 2000 Cadillac Deville Northstar Engine?
The 2000 General Motors/Cadillac Deville came equipped in the 4.6L Northstar engine. Removing the main belt will require depressing the tensioner to free it. The new belt can then be routed across the accessory drive pulleys. The OE AC Delco belts for this application are 6K815 and 3K243.
