remove the panel from the inside of the rear hatch door and check to make sure the latch mechenism is secure if not push or pull the leads to open hatch door then try to reconnect them
If the tailgate handle on your S10 Blazer is broken, you can try accessing the tailgate through the interior. Remove the interior panel near the tailgate to reach the latch mechanism directly. You can then manually pull the latch with a tool to open the tailgate. Alternatively, you might consider using a slim jim or other tools to unlock it from the outside, but be cautious to avoid damage.
Yes it is.
how to open the rear window on a 1997 chevy blazer.
If the outside handle of your 1992 S10 Blazer is broken, you can try accessing the tailgate through the rear window. Use a flathead screwdriver or a similar tool to pry open the window slightly, then reach inside to manually unlock the tailgate latch. Alternatively, you can remove the interior panel of the tailgate to access the latch mechanism directly and open it from the inside. If these methods are not feasible, consider using a professional locksmith or technician for assistance.
no, they are totally different sizes and profiles
big hammer
you have to roll the window down and opend it from the inside. You are not supposed to opend it with the window up because it could break.
These models came stock with a release button below the cigarette lighter. If you look directly to the right of the radio there should be a button to push that will release the glass and then once its open, your tailgate should open once you do it manually. Hope this helps you
To remove the tailgate lock on a 1989 S-10 Blazer, first remove the cover over the inside of the tailgate by removing the bolts on the side and on the handle. Pop the vinyl away from the tailgate. Then remove the bolts holding the lock on and remove the lock.
Open up the tailgate/hatch. Look at the inboard sides of the taillightsThere are two black Phillips-head screws along the body seam, holding the assembly in. Simply remove those screws and pull the assembly straight out. If there are tailgate struts blocking the screws, you'll need to move them aside.
take it to a transmission shop
its locked while window is down.