answersLogoWhite

0

If the tailgate handle on your S10 Blazer is broken, you can try accessing the tailgate through the interior. Remove the interior panel near the tailgate to reach the latch mechanism directly. You can then manually pull the latch with a tool to open the tailgate. Alternatively, you might consider using a slim jim or other tools to unlock it from the outside, but be cautious to avoid damage.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Related Questions

How do you get the tailgate open on 92 s10 blazer if outside handle is broken?

If the outside handle of your 1992 S10 Blazer is broken, you can try accessing the tailgate through the rear window. Use a flathead screwdriver or a similar tool to pry open the window slightly, then reach inside to manually unlock the tailgate latch. Alternatively, you can remove the interior panel of the tailgate to access the latch mechanism directly and open it from the inside. If these methods are not feasible, consider using a professional locksmith or technician for assistance.


How do you get the endgate open when the outside handle is broken on a 98 blazer s10?

After you pop the window either with your remote or the button on the dash you can use a very big screwdriver to open the gate. I found a replacement knob for my tailgate with keys at www.rockauto.com, they were very reasonably priced and quick and easy to change out.


How do you open the rear tailgate of a 1996 Blazer to fix the assembly when the electric release is broken?

It is the actuator, look this up on Blazer forum, someone will tell you step by step how to fix it!! You will have to loosen the inner panel and get your hand in there and find the proper linkage to pull on.


How do you open the tailgate on a 1999 Chevy Tracker?

To open the tailgate on a 1999 Chevy Tracker, locate the tailgate handle located between the rear lights. Pull the handle upward to unlock and release the tailgate. If the tailgate is stuck, ensure that the vehicle is in park and check for any obstructions or issues with the locking mechanism. If necessary, you may need to use a key to unlock the tailgate if it is locked.


1999 chev blazer tailgate and glass won't open all fuses are ok?

Don't know if this will help, but I had the same trouble with my 2002 and my mechanic had to take apart inside panel on back tailgate and there was a switch in their that had broken. The part was just as expensive as the labor and it was quite a task.


1997 blazer tailgate will not open. How can I open the tailgate?

remove the panel from the inside of the rear hatch door and check to make sure the latch mechenism is secure if not push or pull the leads to open hatch door then try to reconnect them


How do you open a broken tailgate on ford pu?

Use a flat head screwdriver to pry open the latches


How do you open hatch to 2003 Chevy blazer?

use the handle....


How do you open peugeot 407 sw tailgate?

To open the tailgate of a Peugeot 407 SW, you can use the key fob by pressing the tailgate release button. Alternatively, you can manually unlock it using the key in the driver's door or the tailgate lock itself, then pull the tailgate handle to lift it. If the vehicle is equipped with a manual release inside, that can also be utilized. Make sure the vehicle is in an unlocked state for the tailgate to open.


How do you replace a tailgate handle on a 2007 Chevy avalanche?

To replace the tailgate handle on a 2007 Chevy Avalanche, first, open the tailgate and remove the screws holding the handle in place, typically located on the inside. Next, disconnect the linkage connected to the handle and gently pull the handle out. Install the new handle by reversing the process: insert it into place, reconnect the linkage, and secure it with the screws. Finally, test the new handle to ensure it functions properly before closing the tailgate.


What do I do when the tailgate will not open on 2001 silverado?

Most often the cause is two broken clips inside the tail gate mechanism. By pushing upwards you can remove the plastic bezel around the tailgate handle; its just snapped into place. You should now be able to see the mechanism under the handle. There are two metal bars coming in from the sides of the tailgate. These operate the latches on either side of the tailgate. They are attached to the central tailgate handle mechanism by plastic clips. One is pink and one is green; colored to indicate whether they go on the right or the left. You can get these clips from a dealership for about 5 bucks a piece. Hope that helps.


How do you open broken tailgate?

There are 3 or 4 bolts on the inside of the tail gate. Remove them and the handle should come out. It should be atached to 2 rods that go to the locking mechanism. More than likely one of the small plastic keepers has broken and the rod has come off from the handle. To open the tailgate, simply pull inward on these rods. The small plastic keepers and the plastic bezel around the handle (which is subject to breaking when removed) can be found at any parts house. The clips are usually $2 for an assortment pack and the bezel (which is subject to breaking when removed) is about $15.