After you pop the window either with your remote or the button on the dash you can use a very big screwdriver to open the gate. I found a replacement knob for my tailgate with keys at www.rockauto.com, they were very reasonably priced and quick and easy to change out.
Need to know inside or outside door handle.
Seperate valve for outside faucet turned off, broken valve stem inside of outside faucet or handle stripped at faucet.
You will need to remove the door panels, and look up in the door at the handle you will see two nuts that hold the handle and a plastic clip on a rod, remove those and replace handle.
To fix a door with a broken handle on the outside that won’t open from the inside, first, check if the latch is stuck. Try using a flathead screwdriver to manually turn the latch from the inside if there's a visible slot. If that doesn’t work, remove the door handle and lock mechanism to inspect for any broken parts. Replace any damaged components or the entire handle set as needed, then reassemble the door.
That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?
Removing a spare tire on a 1998 Blazer is very east. The tire is located under the rear of the blazer. The tire has a turn handle that will release the tire. Turn the handle until the tire releases.
The problem is that the inside door handle is broken. Although the inside door handle needs replacement you can still open the door by pulling on the lock lever above the handle.
use the handle....
from the inside. take your door panel off and look around in there. the door handle is usually held on with pop rivets that have to be cut off from the inside of the door.
You will need to remove the inside door panel of your 1988 Chevrolet Blazer S 10. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
You will need to remove the inside door panel of your 1993 Chevrolet Blazer. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
how do I open a door when the handle broke and the part theat connects into the outer wall will not release?