answersLogoWhite

0

its a hard belt to find if you take it to the auto parts store they just look at you funny the belt number is 820 k6

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

94 f150 5.0 smog pump bypass belt length?

You may not bypass a smog pump. It is a part of the vehicle's emission's control system and bypassing it is a violation of federal law.


What size serpentine belt do you need to bypass smog pump for a 1995 Ford F150 4.9?

To bypass the smog pump on a 1995 Ford F-150 with a 4.9L engine, you typically need a serpentine belt that is around 91 inches in length. It's essential to ensure that the belt you choose is compatible with your vehicle's specific setup and routing after removing the smog pump. Always double-check the exact measurements and consult a repair manual or parts supplier for confirmation.


What size belt would I need to bypass a smog pump on a 1984 Corvette?

To bypass the smog pump on a 1984 Corvette, you typically need a shorter serpentine belt, as the pump will be removed from the system. The exact belt size can vary, but a common replacement size is around 77 inches. It's always best to consult a repair manual specific to your vehicle or check with an auto parts store for the most accurate size for your setup.


What belt size 302 bypass for removal of smog pump plus AC?

what belt size to a 302 bypass for removal of smog pump and AC


What size belt would you need if you by-pass the smog pump on a 1993 ford f150 5.0 liter?

Go to Autozone and get an 88.2-inch 6-rib serpentine belt. This will effectively bypass the smog pump and keep all other accessories operational.


How can i bypass the power steering pump in a 97 grand prix gtp when routing serpentine belt?

A smaller belt


What size serpentine belt do you need to bypass smog pump for a 1995 Ford F-250 5.8L?

93.5 inches for the bypass


Can you bypass the ac belt?

Unfortunately the Taurus needs the AC Pulley to turn the water pump you CAN get a bypass pully for 30 bux and use the same belt and routing but the shorter no AC belt will not work on that engine


What size belt do you need to bypass a smog pump in a 1993 Ford Bronco 351 Windser?

Stock belt size is 102'' with the smog pump pulley. You will need a 94.5'' belt to bypass it. Make sure when you remove the pulley, that you put the three screws back in to keep the holes from rusting.


Can you bypass air condition pump on 98 maxima with a shorter belt?

you can use a 920mm 6groove belt or a 36 inch 6groove belt maybe even 35


Is there a belt that can bypass the power steering pump on a 1996 v6 camaro?

I'm sure you can do it and there is a belt out there that will fit but you will have to take a piece of rope and route it on the pulleys like the factory diagraphm minus the power steering pulley and then measure the length of the piece of rope and try to find a serpentine belt that size.


What are ideas on how to bypass the AC compressor with the serpentine belt on a 1996 Blazer S10?

This is just a guess so take it with a grain of salt. I would buy a belt for the s10 without air conditioning and just bypass the air conditioning pump.