To check trouble codes on a 1995 Chevy Beretta, first, locate the diagnostic connector under the dashboard near the steering column. Use a paperclip or jumper wire to connect terminals A and B on the connector. Turn the ignition key to the "On" position without starting the engine, and the check engine light will begin to flash, indicating the trouble codes. Count the flashes to determine the corresponding codes, which can then be referenced to diagnose any issues.
CKT range/perf
follow the link for your wiring codes
Some Haynes manuals have ECU codes
Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.
you check the system for trouble codes.
if you are looking to reset a check engine light or any trouble codes, you will need to have it done with an OBD2 handheld scanner.
The ALDL port is located on the driver's side, under the dash. You will need a GM Tech1 (or compatible) scantool to retrieve codes from either a 1994 or 1995 Beretta. This is because GM was in a transitional period between 1993-1996 to comply with the government mandated OBD-II system. The diagnostic components in those years are a combination of OBD-I and OBD-II parts, and cannot be scanned with a standard scantool. Unfortunately, unless you know someone with such a scantool (GM Tech1, Actron CP9150, etc.), you will need to go to a GM dealer to have your codes read.
Either unplug the battery for 10 minutes, or go to your local auto store (Orielly or Auto Zone) and borrow their scanner to clear the codes. Ask if you require assistance.
yes, and what codes are you asking about "check engine" or anti lock radio codes?
Trouble code P0601 means:Internal control module memory check sum error Trouble code P0602 means:Control module programming error
There are several ABS trouble codes for a Chevrolet automobile. The most common ABS trouble code is; error code 628.
If it is OBD 1, yes.