To connect the spark plug wires on a Buick Terraza, first ensure the engine is off and cool. Locate the firing order diagram, usually found on a sticker under the hood or in the owner’s manual. Starting from the distributor cap or ignition coil, connect each spark plug wire to its corresponding cylinder based on the firing order, ensuring a secure fit. Finally, double-check that each wire is routed neatly and away from any moving parts or hot surfaces.
Distributor
One at a time
Check spark plugs and wires
how to replace spark plugs wires 1992 buick century v 6 3300 stationwagon
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
Just follow the spark plug wires....
Check firing order
To change the spark plug wires on a 97 Buick LeSabre, first pull the wires loose from the plugs. After these are removed, pull the wires loose from the opposite end and replace them.
Try changing the spark plug wires.
18436572 ~FN~ www.forumnut.net
Disconnect the battery, and remove the spark plug wires one by one. Replace the spark plug wires in the same order, ensure the connection is firm, and connect the battery.
bad spark wires